ChilliNet

Edward Updated by Edward

The ChilliNet interface provides the ability to send and receive ChilliNet messages over a standard RS232 connection.

ChilliNet can be used to control shortcuts and submasters from wall panels. To enable ChilliNet message sending and receiving, check the box at the top of this tab.

 

Use the Com Port combo box to set the physical port that ChilliNet is connected to.

 

The Zoning selection can be used to send zone messages to the system for initial setup of the wall panels. Place the wall panel into programming mode and then select the zone you want to program from the drop-down box.

How did we do?

OSC

iCAN

Contact