Quick Start

Creating a New Show

This chapter provides a tutorial of some basic operations to get you started with the NEO software using a small setup to illustrate procedures such as patching, controlling fixtures in Live, recordi…

Edward
Updated by Edward

Patching Some Fixtures

Below is the magic sheet diagram of the fixtures used in the examples showing their types, relative positions and channel assignments: Channels 1-6 are conventional incandescent luminaires connected…

Edward
Updated by Edward

Live Channel Control

If the [LIVE] key is not illuminated in red, press it to switch to Live mode. Selecting Channels Manually – In Classic or Magic Sheet view, a selected channel is denoted by a red border surrounding i…

Edward
Updated by Edward

Recording Groups, Palettes & Submasters

Groups and palettes are used to store attribute information for later recall. For NEO, groups and palettes are stored together. A Group is a type of palette that can contain a snapshot of all the att…

Edward
Updated by Edward

Recording & Updating Cues

The following examples illustrate the process of setting up the fixtures to achieve desired “looks” on stage and recording a series of cues that can be played back during a performance of the show. A…

Edward
Updated by Edward

Adding an Effect

The NEO software contains a library of effects that can be applied in Live with parameters that can be adjusted and then incorporated into a cue. In addition, the software has an extensive effects en…

Edward
Updated by Edward

Saving the Show

The show must be saved if you wish to load it at a future time. The following sequence will save a show: Tap the “ Options ’ button in the lower left corner of the Main Display. Choose “ Save File ”…

Edward
Updated by Edward

Running a Show

As cues are recorded, they appear in the Side Bar Cue List and become active (by default). After the last cue is recorded, press the [REL CUE LIST] key or tap the Reset button in the Side Bar Cue Lis…

Edward
Updated by Edward

Contact